序列近似优化方法及其在火箭外形快速设计中的应用

针对序列近似优化方法在代理模型构造与采样策略等方面的不足,基于采样点局部密度,引入与局部密度成反比的样本点影响体积概念,通过优化总影响体积确定径向基函数最优核宽度,满足序列近似优化过程不同规模、非均匀样本条件下的函数近似需要;建立潜在可行域最大距离加点准则,并与潜在最优加点准则结合平衡算法的探索能力与开发能力;建立三步收敛判定准则;构建改进序列近似优化的算法流程。对于Golinski减速器的优化设计问题,算法在目标函数调用42次后便搜索到全局最优解,体现了其良好的全局寻优能力与搜索效率。以"天航二号"火箭为例,建立其外形优化问题数学模型,所提优化方法在调用原始计算模型165次之后便搜索到全局最优解,大大提高了设计效率,同时飞行试验也表明设计结果满足要求。     

直杆塑性动力屈曲的能量准则和特征参数解

提出弹塑性应力波作用下直杆动力屈曲的定量求解方法,将临界应力和惯性指数作为一对特征参数求解.由相平衡邻位形准则得出屈曲控制方程和边界条件,由所导出的能量转换和守恒准则得出压缩波阵面上的附加约束方程,由此得出了问题的完备定解条件,从而提出了求解直杆塑性动力屈曲的特征参数方法.     

地面战场多目标声探测识别系统的研究

讨论了声探测识别的原理,介绍了战场多目标声探测识别系统的构成及工作原理,对于系统构成的技术关键及解决途径进行了论述。     

基于交叉熵最小化的 Turbo 码迭代译码停止准则

根据Turbo码最优译码算法及迭代译码的基本原理 ,在保证迭代收敛的条件下 ,利用交叉熵最小化原则推导出Turbo码译码过程中停止迭代的准则 ,并给出了一种降低计算复杂性和减少存贮空间的简化算法 ,最后通过仿真证明了此迭代停止准则及其简化算法的有效性。     

利用开源大数据的社会工作实时评估方法

鉴于目前社会工作评估评价方面的学术研究还较薄弱,存在无针对性指标体系,现有相关评比周期长、成本高等突出问题,探索构建了利用互联网开源大数据的实时定量评估模型,建立了针对性指标体系,提出评分快速计算方法,并设计实现原型软件。针对选定的社会工作进行案例实证,通过采集某省14个市州的互联网真实数据来评估其工作力度,结果与多位受访者的主观感受及相关官方评估基本相符,验证了所提模型的有效性和合理性。     

A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.     

Shock initiation performance of NTO-based polymer bonded explosive

3-nitro-1,2,4-tri-azol-5-one (NTO) is a high energy insensitive explosive. To study the shock initiation process of NTO-based polymer bonded explosive JEOL-1 (32%octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), 32% NTO, 28% Al and 8% binder system), the cylinder test, the gap experiments and numerical simulation were carried out. Firstly, we got the detonation velocity (7746 m/s) and the parameters of Jones-Wilkins-Lee (JWL) equation of state (EOS) for detonation product by cylinder test and numerical simulation. Secondly, the Hugoniot curve of unreacted explosive for JEOL-1 was obtained calculating the data of pressure and time at different Lagrangian positions. Then the JWL EOS of unreacted explosive was obtained by utilizing the Hugoniot curve as the reference curve. Finally, we got the pressure growth history of JEOL-1 under shock wave stimulation and the parameters of the ignition and growth reaction rate equation were obtained by the pressure-time curves measured by the shock-initiation gap experiment and numerical simulation. The determined trinomial ignition and growth model (IG model) parameters can be applied to subsequently simulation analysis and design of insensitive ammunition with NTO-based polymer bonded explosive.     

超空泡航行体深度跟踪串级控制策略

针对空泡与航行体之间非线性滑行力导致的超空泡航行体稳定性问题,提出了基于圆判据理论和Nelder-Mead算法的超空泡航行体深度跟踪串级控制方法。介绍了超空泡航行体数学模型以及圆判据定理基础知识。结合模型特性推导了超空泡航行体串级误差状态方程,利用圆判据定理研究了内环绝对稳定性。通过Nelder-Mead算法对内环反馈参数进一步优化。仿真分析结果表明：所提控制方法便于反馈参数整定,可以充分利用超空泡航行体的控制量实现深度跟踪。     

复杂环境下多雷达点迹融合

针对系统误差、杂波干扰等对点迹融合处理系统的影响,结合工程实践,提出了一种处理复杂环境下多雷达点迹融合结构框架,给出了存在系统误差情形下的多雷达航迹起始、虚假目标抑制、雷达误差配准等模型和算法。仿真结果表明,提出的框架、模型和算法能够有效处理多雷达点迹融合问题。     

Formation of explosively formed penetrator with fins and its flight characteristics

The ultimate goal of weapon system employing an explosively formed penetrator (EFP) is to defeat a target at the longest standoff. In order to do this, an EFP must be aerodynamically stable so as to strike the target at a small angle of obliquity, and the decay velocity per meter of EFP must be smaller at extended standoff. As the angle of attack increases, the penetration ability of EFP greatly reduces. The fins improve the EFP aeroballistic characteristics and decrease the flight drag of EFP as well. EFP with fins formed by three-point initiation is presented. The formation of EFP with fins is studied by LS-DYNA, and the aeroballistics is studied through experiment. The experimental results show that the decay velocity per meter of EFP with fins is much smaller than that of normal EFP, and the attitude angle steadily decreases.